Skip to content

Steve's Gift Shoppe

Pet Coffin Casket for Dogs or Cats 24 x 12 x 9 Inches / U-Build Assembly Kit

  • by

Pet Coffin You-Build-Kit Material: 1/2-Inch Red Oak Ply or Birch depending on available materials Printed assembly instructions included Outside Dimensions: 24 x 12 x 9 Inches (Length x Width x Height) Actual outside dimensions are 23.5 x 11.75 x 9 inches. Inside Dimensions: One inch less than outside dimensions (wall thickness is 1/2 inch) at 22.5 x 11 x 8 inches. This is a project kit for building a pet coffin. Printed assembly instructions are included as well as hardware. All parts cut to size. All hardware is provided. Printed assembly instructions show step-by-step how to complete this item. Tools needed: Electric screwdriver. Wood glue is recommended but not required. Assembly time: Approximately 15 minutes to 60 minutes, depending on skill level. Overnight Shipping Available Upon Request. You will need to contact us to make arrangements and we will need to find out the overnight shipping cost to your address. This pet coffin is for small animals such as cats or small dogs up to about 20 – 30 pounds. Please take measurements. If you need a larger size, contact us and provide size specifications that you need and we will post a new eBay listing to your size requirements. Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask. No finish is applied to this product. However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer. This product is shipped via Priority Mail. If you need overnight/express mail, select that shipping option. Product notes: This kit is made at the time it is ordered. Assembly method: 1. Build the frame which consists of side panels, end panels. 2. Attach the bottom panel to the frame, which forms a box. 3. The last step is to attach the top panel to seal the pet coffin. Material Notes: This kit is made from hardwood ply, which will break down over time after the coffin is buried. If you apply a few coats of clear finish, or spray enamel ( Krylon or Rustoleum), it will not break down as fast once it is in the ground. Assembly instructions with photos included with our telephone number if you need any assistance.

Pet Coffin Casket for Dogs or Cats 24 x 18 x 6

  • by

This Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This product is made in the USA.

Pet Coffin Casket for Dogs or Cats 24 x 12 x 6 U-Build Assembly Kit

  • by

Pet Coffin You-Build-Kit Note: If you want this item in a fully assembled version, please see eBay item 324268199554. Material: 1/2-Inch Red Oak Ply or Birch depending on available materials Printed assembly instructions included Outside Dimensions: 24 x 12 x 6 Inches (Length x Width x Height) Actual outside dimensions are 23.5 x 11.75 so to properly fit in a priority mail large flat rate box. Inside Dimensions: One inch less than outside dimensions (wall thickness is 1/2 inch) Material Notes: If red oak ply is not available, then we will use birch ply for this product. This is a project kit for building a pet coffin. Printed assembly instructions are included as well as hardware. All parts cut to size. All hardware is provided. Printed assembly instructions show step-by-step how to complete this item. Tools needed: Electric screwdriver. Wood glue is recommended but not required. Assembly time: Approximately 15 minutes to 60 minutes, depending on skill level. Overnight Shipping Available Upon Request. You will need to contact us to make arrangements and we will need to find out the overnight shipping cost to your address. Orders in by noon, Pacific Time usually shipped same business day. This pet coffin is for small animals such as cats or small dogs up to about 20 pounds. Please take measurements. If you need a larger size, contact us and provide size specifications that you need and we will post a new eBay listing to your size requirements. Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask. No finish is applied to this product. However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer. This product is shipped via Priority Mail. If you need overnight/express mail, select that shipping option. Product notes: This kit is made at the time it is ordered. Assembly method: 1. Build the frame which consists of side panels, end panels. 2. Attach the bottom panel to the frame, which forms a box. 3. The last step is to attach the top panel to seal the pet coffin. Material Notes: This kit is made from hardwood ply, which will break down over time after the coffin is buried. If you apply a few coats of clear finish, or spray enamel ( Krylon or Rustoleum), it will not break down as fast once it is in the ground. Assembly instructions with photos included with our telephone number if you need any assistance.

Pet Coffin Casket for Dogs or Cats 24 x 15 x 6 Pine Box

  • by

Pet Coffin Pine Box Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This pet coffin is for small animals such as cats or small dogs up to about 30 pounds. You should take measurements. Outside Dimensions: 24 x 15 x 6 Inches (LxWxH) Inside Dimensions: 22.5 x 13.5 x 5 Inches Material: 3/4-inch pine Lid: The lid to this pet coffin is a one-piece flat panel. Nails will be provided for you to seal the lid. Overnight Shipping Available. PRODUCTION TIME: This item is produced in our Oregon workshop at the time of your order, and will usually take about 24 hours to complete the item and have it ready for shipment. This product is made in Oregon, USA. Different sizes are available to fit your pet, so if you need a different size, please ask. Finish: Natural, no finish applied to this product.

Pet Coffin Casket for Dogs or Cats 16 x 16 x 7 Inches – Fully Assembled

  • by

Pet Coffin Material: Top and bottom 1/2-Inch Red Oak Ply or Birch depending on available materials. If 1/2-inch is not available, then I will use 3/4-inch hardwood ply. Outside Dimensions: 16 x 16 x 7 Inches (Length x Width x Height) Inside dimensions are approximately 15 x 15 x 6 inches. This pet coffin is for small animals such as cats or small dogs up to about 20 – 30 pounds. Please take measurements. If you need a larger size, contact us and provide size specifications that you need and we will post a new eBay listing to your size requirements. Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask. No finish is applied to this product. However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer. This product is shipped within one business day from Oregon, USA. Product notes: This kit is made at the time it is ordered. Material Notes: This kit is made from hardwood ply, which will break down over time after the coffin is buried. If you apply a few coats of clear finish, or spray enamel ( Krylon or Rustoleum), it will not break down as fast once it is in the ground.

Pet Coffin Casket for Dogs or Cats 23 x 15 x 6 All Cedar U-Build-It Assembly Kit

  • by

Cedar Pet Coffin Printed assembly instructions included Outside Dimensions: 23 x 15 x 6 Inches (Length x Width x Height) Inside Dimensions: 22 x 14 x 5 Inches (approximate) U-Build-It Kit This is a project kit for building a cedar pet coffin. Printed assembly instructions are included as well as hardware. All parts are provided as semi-finished and sanded planks and all parts cut to size. All hardware is provided. Printed assembly instructions show step-by-step how to complete this item. Tools needed: Hammer, electric screwdriver, and palm sander or orbital sander. Note: You can build this with a hammer and use the finishing nails provided, but it is strongly recommended that you assemble this kit with an electric screwdriver. Other supplies: You should use yellow woodworker’s glue such as TiteBond as noted in the instructions. Estimated assembly time: Approximately 1 hour. Overnight Shipping Available Upon Request. You will need to contact us to make arrangements and we will need to find out the overnight shipping cost to your address. This pet coffin is for small animals such as cats or small dogs up to about 30 pounds. You should take measurements. Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet. This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask. No finish is applied to this product. However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer. This product is shipped usually within one or two days. Product notes: Assembly method: 1. Build the frame which consists of side panels, end panels, and corner posts. 2. Build the top and bottom panels, which consists of three planks and two cross braces. 2. Attach the bottom panel to the frame, which forms a box. 4. The last step is to attach and nail down the top panel to seal the pet coffin. Material Notes: We use real cedar planks (not particle board), and planks are milled and planed to a thickness of approximately 1/2 inch thickness. The planks are ”rough sanded” which means they are smooth, but not sanded to furniture grade perfection, and you may want to do additional *sanding at your preference. Because these planks are real cedar wood, the cedar planks may develop minor cupping or warping due to changes in humidity, but these planks are flexible. *Caution: When sanding cedar, wear a dust mask or bandana or scarf over mouth and nose to not inhale cedar dust. Assembly instructions with photos are included with our telephone number if you need any assistance.

Pet Coffin Casket for Dogs or Cats 17 x 14 x 7 All Cedar

  • by

ENGRAVING AVAILABLE UPON REQUEST: We have an engraver nearby and we can have them do laser engraving to the top of this pet casket. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin.